"""
Simple formatting on strings. Further string formatting code is in trans.py.
"""

import re
import sys
from functools import lru_cache
from re import Match, Pattern
from typing import Final

from black._width_table import WIDTH_TABLE
from blib2to3.pytree import Leaf

STRING_PREFIX_CHARS: Final = "fturbFTURB"  # All possible string prefix characters.
STRING_PREFIX_RE: Final = re.compile(
    r"^([" + STRING_PREFIX_CHARS + r"]*)(.*)$", re.DOTALL
)
UNICODE_ESCAPE_RE: Final = re.compile(
    r"(?P<backslashes>\\+)(?P<body>"
    r"(u(?P<u>[a-fA-F0-9]{4}))"  # Character with 16-bit hex value xxxx
    r"|(U(?P<U>[a-fA-F0-9]{8}))"  # Character with 32-bit hex value xxxxxxxx
    r"|(x(?P<x>[a-fA-F0-9]{2}))"  # Character with hex value hh
    r"|(N\{(?P<N>[a-zA-Z0-9 \-]{2,})\})"  # Character named name in the Unicode database
    r")",
    re.VERBOSE,
)


def sub_twice(regex: Pattern[str], replacement: str, original: str) -> str:
    """Replace `regex` with `replacement` twice on `original`.

    This is used by string normalization to perform replaces on
    overlapping matches.
    """
    return regex.sub(replacement, regex.sub(replacement, original))


def has_triple_quotes(string: str) -> bool:
    """
    Returns:
        True iff @string starts with three quotation characters.
    """
    raw_string = string.lstrip(STRING_PREFIX_CHARS)
    return raw_string[:3] in {'"""', "'''"}


def lines_with_leading_tabs_expanded(s: str) -> list[str]:
    """
    Splits string into lines and expands only leading tabs (following the normal
    Python rules)
    """
    lines = []
    for line in s.splitlines():
        stripped_line = line.lstrip()
        if not stripped_line or stripped_line == line:
            lines.append(line)
        else:
            prefix_length = len(line) - len(stripped_line)
            prefix = line[:prefix_length].expandtabs()
            lines.append(prefix + stripped_line)
    if s.endswith("\n"):
        lines.append("")
    return lines


def fix_multiline_docstring(docstring: str, prefix: str) -> str:
    # https://www.python.org/dev/peps/pep-0257/#handling-docstring-indentation
    assert docstring, "INTERNAL ERROR: Multiline docstrings cannot be empty"
    lines = lines_with_leading_tabs_expanded(docstring)
    # Determine minimum indentation (first line doesn't count):
    indent = sys.maxsize
    for line in lines[1:]:
        stripped = line.lstrip()
        if stripped:
            indent = min(indent, len(line) - len(stripped))
    # Remove indentation (first line is special):
    trimmed = [lines[0].strip()]
    if indent < sys.maxsize:
        last_line_idx = len(lines) - 2
        for i, line in enumerate(lines[1:]):
            stripped_line = line[indent:].rstrip()
            if stripped_line or i == last_line_idx:
                trimmed.append(prefix + stripped_line)
            else:
                trimmed.append("")
    return "\n".join(trimmed)


def get_string_prefix(string: str) -> str:
    """
    Pre-conditions:
        * assert_is_leaf_string(@string)

    Returns:
        @string's prefix (e.g. '', 'r', 'f', or 'rf').
    """
    assert_is_leaf_string(string)

    prefix = []
    for char in string:
        if char in STRING_PREFIX_CHARS:
            prefix.append(char)
        else:
            break
    return "".join(prefix)


def assert_is_leaf_string(string: str) -> None:
    """
    Checks the pre-condition that @string has the format that you would expect
    of `leaf.value` where `leaf` is some Leaf such that `leaf.type ==
    token.STRING`. A more precise description of the pre-conditions that are
    checked are listed below.

    Pre-conditions:
        * @string starts with either ', ", <prefix>', or <prefix>" where
        `set(<prefix>)` is some subset of `set(STRING_PREFIX_CHARS)`.
        * @string ends with a quote character (' or ").

    Raises:
        AssertionError(...) if the pre-conditions listed above are not
        satisfied.
    """
    dquote_idx = string.find('"')
    squote_idx = string.find("'")
    if -1 in [dquote_idx, squote_idx]:
        quote_idx = max(dquote_idx, squote_idx)
    else:
        quote_idx = min(squote_idx, dquote_idx)

    assert (
        0 <= quote_idx < len(string) - 1
    ), f"{string!r} is missing a starting quote character (' or \")."
    assert string[-1] in (
        "'",
        '"',
    ), f"{string!r} is missing an ending quote character (' or \")."
    assert set(string[:quote_idx]).issubset(
        set(STRING_PREFIX_CHARS)
    ), f"{set(string[:quote_idx])} is NOT a subset of {set(STRING_PREFIX_CHARS)}."


def normalize_string_prefix(s: str) -> str:
    """Make all string prefixes lowercase."""
    match = STRING_PREFIX_RE.match(s)
    assert match is not None, f"failed to match string {s!r}"
    orig_prefix = match.group(1)
    new_prefix = (
        orig_prefix.replace("F", "f")
        .replace("B", "b")
        .replace("U", "")
        .replace("u", "")
    )

    # Python syntax guarantees max 2 prefixes and that one of them is "r"
    if len(new_prefix) == 2 and new_prefix[0].lower() != "r":
        new_prefix = new_prefix[::-1]
    return f"{new_prefix}{match.group(2)}"


# Re(gex) does actually cache patterns internally but this still improves
# performance on a long list literal of strings by 5-9% since lru_cache's
# caching overhead is much lower.
@lru_cache(maxsize=64)
def _cached_compile(pattern: str) -> Pattern[str]:
    return re.compile(pattern)


def normalize_string_quotes(s: str) -> str:
    """Prefer double quotes but only if it doesn't cause more escaping.

    Adds or removes backslashes as appropriate.
    """
    value = s.lstrip(STRING_PREFIX_CHARS)
    if value[:3] == '"""':
        return s

    elif value[:3] == "'''":
        orig_quote = "'''"
        new_quote = '"""'
    elif value[0] == '"':
        orig_quote = '"'
        new_quote = "'"
    else:
        orig_quote = "'"
        new_quote = '"'
    first_quote_pos = s.find(orig_quote)
    assert first_quote_pos != -1, f"INTERNAL ERROR: Malformed string {s!r}"

    prefix = s[:first_quote_pos]
    unescaped_new_quote = _cached_compile(rf"(([^\\]|^)(\\\\)*){new_quote}")
    escaped_new_quote = _cached_compile(rf"([^\\]|^)\\((?:\\\\)*){new_quote}")
    escaped_orig_quote = _cached_compile(rf"([^\\]|^)\\((?:\\\\)*){orig_quote}")
    body = s[first_quote_pos + len(orig_quote) : -len(orig_quote)]
    if "r" in prefix.casefold():
        if unescaped_new_quote.search(body):
            # There's at least one unescaped new_quote in this raw string
            # so converting is impossible
            return s

        # Do not introduce or remove backslashes in raw strings
        new_body = body
    else:
        # remove unnecessary escapes
        new_body = sub_twice(escaped_new_quote, rf"\1\2{new_quote}", body)
        if body != new_body:
            # Consider the string without unnecessary escapes as the original
            body = new_body
            s = f"{prefix}{orig_quote}{body}{orig_quote}"
        new_body = sub_twice(escaped_orig_quote, rf"\1\2{orig_quote}", new_body)
        new_body = sub_twice(unescaped_new_quote, rf"\1\\{new_quote}", new_body)

    if "f" in prefix.casefold():
        matches = re.findall(
            r"""
            (?:(?<!\{)|^)\{  # start of the string or a non-{ followed by a single {
                ([^{].*?)  # contents of the brackets except if begins with {{
            \}(?:(?!\})|$)  # A } followed by end of the string or a non-}
            """,
            new_body,
            re.VERBOSE,
        )
        for m in matches:
            if "\\" in str(m):
                # Do not introduce backslashes in interpolated expressions
                return s

    if new_quote == '"""' and new_body[-1:] == '"':
        # edge case:
        new_body = new_body[:-1] + '\\"'
    orig_escape_count = body.count("\\")
    new_escape_count = new_body.count("\\")
    if new_escape_count > orig_escape_count:
        return s  # Do not introduce more escaping

    if new_escape_count == orig_escape_count and orig_quote == '"':
        return s  # Prefer double quotes

    return f"{prefix}{new_quote}{new_body}{new_quote}"


def normalize_fstring_quotes(
    quote: str,
    middles: list[Leaf],
    is_raw_fstring: bool,
) -> tuple[list[Leaf], str]:
    """Prefer double quotes but only if it doesn't cause more escaping.

    Adds or removes backslashes as appropriate.
    """
    if quote == '"""':
        return middles, quote

    elif quote == "'''":
        new_quote = '"""'
    elif quote == '"':
        new_quote = "'"
    else:
        new_quote = '"'

    unescaped_new_quote = _cached_compile(rf"(([^\\]|^)(\\\\)*){new_quote}")
    escaped_new_quote = _cached_compile(rf"([^\\]|^)\\((?:\\\\)*){new_quote}")
    escaped_orig_quote = _cached_compile(rf"([^\\]|^)\\((?:\\\\)*){quote}")
    if is_raw_fstring:
        for middle in middles:
            if unescaped_new_quote.search(middle.value):
                # There's at least one unescaped new_quote in this raw string
                # so converting is impossible
                return middles, quote

        # Do not introduce or remove backslashes in raw strings, just use double quote
        return middles, '"'

    new_segments = []
    for middle in middles:
        segment = middle.value
        # remove unnecessary escapes
        new_segment = sub_twice(escaped_new_quote, rf"\1\2{new_quote}", segment)
        if segment != new_segment:
            # Consider the string without unnecessary escapes as the original
            middle.value = new_segment

        new_segment = sub_twice(escaped_orig_quote, rf"\1\2{quote}", new_segment)
        new_segment = sub_twice(unescaped_new_quote, rf"\1\\{new_quote}", new_segment)
        new_segments.append(new_segment)

    if new_quote == '"""' and new_segments[-1].endswith('"'):
        # edge case:
        new_segments[-1] = new_segments[-1][:-1] + '\\"'

    for middle, new_segment in zip(middles, new_segments, strict=True):
        orig_escape_count = middle.value.count("\\")
        new_escape_count = new_segment.count("\\")

    if new_escape_count > orig_escape_count:
        return middles, quote  # Do not introduce more escaping

    if new_escape_count == orig_escape_count and quote == '"':
        return middles, quote  # Prefer double quotes

    for middle, new_segment in zip(middles, new_segments, strict=True):
        middle.value = new_segment

    return middles, new_quote


def normalize_unicode_escape_sequences(leaf: Leaf) -> None:
    """Replace hex codes in Unicode escape sequences with lowercase representation."""
    text = leaf.value
    prefix = get_string_prefix(text)
    if "r" in prefix.lower():
        return

    def replace(m: Match[str]) -> str:
        groups = m.groupdict()
        back_slashes = groups["backslashes"]

        if len(back_slashes) % 2 == 0:
            return back_slashes + groups["body"]

        if groups["u"]:
            # \u
            return back_slashes + "u" + groups["u"].lower()
        elif groups["U"]:
            # \U
            return back_slashes + "U" + groups["U"].lower()
        elif groups["x"]:
            # \x
            return back_slashes + "x" + groups["x"].lower()
        else:
            assert groups["N"], f"Unexpected match: {m}"
            # \N{}
            return back_slashes + "N{" + groups["N"].upper() + "}"

    leaf.value = re.sub(UNICODE_ESCAPE_RE, replace, text)


@lru_cache(maxsize=4096)
def char_width(char: str) -> int:
    """Return the width of a single character as it would be displayed in a
    terminal or editor (which respects Unicode East Asian Width).

    Full width characters are counted as 2, while half width characters are
    counted as 1.  Also control characters are counted as 0.
    """
    table = WIDTH_TABLE
    codepoint = ord(char)
    highest = len(table) - 1
    lowest = 0
    idx = highest // 2
    while True:
        start_codepoint, end_codepoint, width = table[idx]
        if codepoint < start_codepoint:
            highest = idx - 1
        elif codepoint > end_codepoint:
            lowest = idx + 1
        else:
            return 0 if width < 0 else width
        if highest < lowest:
            break
        idx = (highest + lowest) // 2
    return 1


def str_width(line_str: str) -> int:
    """Return the width of `line_str` as it would be displayed in a terminal
    or editor (which respects Unicode East Asian Width).

    You could utilize this function to determine, for example, if a string
    is too wide to display in a terminal or editor.
    """
    if line_str.isascii():
        # Fast path for a line consisting of only ASCII characters
        return len(line_str)
    return sum(map(char_width, line_str))


def count_chars_in_width(line_str: str, max_width: int) -> int:
    """Count the number of characters in `line_str` that would fit in a
    terminal or editor of `max_width` (which respects Unicode East Asian
    Width).
    """
    total_width = 0
    for i, char in enumerate(line_str):
        width = char_width(char)
        if width + total_width > max_width:
            return i
        total_width += width
    return len(line_str)
