FwupdPlugin – 1.0: Plugin: Ilitek Its
Description: Reference for FwupdPlugin-1.0: Plugin: Ilitek Its

#### Plugin: Ilitek Its

## Introduction

This plugin can update ILITEK touch controller’s firmware. Devices are enumerated via HID-over-I2C, USB and intel-quicki2c driver.

## Firmware Format

The daemon will decompress the cabinet archive and extract a firmware blob in a packed binary file format.

This plugin supports the following protocol ID:

- `tw.com.ilitek.its`

## GUID Generation

These devices use the standard DeviceInstanceId values, e.g.

- `HIDRAW\VEN_222A&DEV_1234`
- `HIDRAW\VEN_222A&DEV_FF29`

Additional instance ID are added which corresponds to the FWID and/or sensor ID:

- `HIDRAW\VEN_222A&DEV_1234&FWID_1234`
- `HIDRAW\VEN_222A&DEV_1234&SENSORID_12`

Additional instance IDs are added which corresponds to the EDID PNP ID and product code:

- `HIDRAW\VEN_222A&DEV_1234&PNPID_ABC`
- `HIDRAW\VEN_222A&DEV_1234&PNPID_ABC&PCODE_1234`
- `HIDRAW\VEN_222A&DEV_1234&SENSORID_12&PNPID_ABC&PCODE_1234`

## Update Behavior

The device is updated after switching into bootloader mode, where touchscreen is nonfunctional. After a successful firmware update, device will switch back to normal runtime mode.

## Vendor ID Security

The vendor ID is set from the HID vendor, e.g. `HIDRAW:0x222A`

## Quirk Use

This plugin uses the following plugin-specific quirks:

### IlitekItsSensorIdMask

The sensor ID mask to use when constructing the instance ID.

Since: 2.0.14

## External Interface Access

This plugin requires ioctl `HIDIOCSFEATURE` and read access to `/dev/hidraw`.

## Version Considerations

This plugin has been available since fwupd version `2.0.14`.