commit c6a15d151e35facd89d1cfcb4d734d452ade1cbb Author: Greg Kroah-Hartman Date: Wed Aug 26 10:29:07 2020 +0200 Linux 4.9.234 Tested-by: Jon Hunter Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit c0ca97bcfc0bbb4b965450b0952b7b045ed37f2a Author: Will Deacon Date: Mon Aug 24 12:29:40 2020 +0100 KVM: arm/arm64: Don't reschedule in unmap_stage2_range() Upstream commits fdfe7cbd5880 ("KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()") and b5331379bc62 ("KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set") fix a "sleeping from invalid context" BUG caused by unmap_stage2_range() attempting to reschedule when called on the OOM path. Unfortunately, these patches rely on the MMU notifier callback being passed knowledge about whether or not blocking is permitted, which was introduced in 4.19. Rather than backport this considerable amount of infrastructure just for KVM on arm, instead just remove the conditional reschedule. Cc: # v4.9 only Cc: Marc Zyngier Cc: Suzuki K Poulose Cc: James Morse Signed-off-by: Will Deacon Acked-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman commit 606c6eb9f8a908757c082bc49cd75d167b15f2e7 Author: Juergen Gross Date: Thu Aug 20 08:59:08 2020 +0200 xen: don't reschedule in preemption off sections For support of long running hypercalls xen_maybe_preempt_hcall() is calling cond_resched() in case a hypercall marked as preemptible has been interrupted. Normally this is no problem, as only hypercalls done via some ioctl()s are marked to be preemptible. In rare cases when during such a preemptible hypercall an interrupt occurs and any softirq action is started from irq_exit(), a further hypercall issued by the softirq handler will be regarded to be preemptible, too. This might lead to rescheduling in spite of the softirq handler potentially having set preempt_disable(), leading to splats like: BUG: sleeping function called from invalid context at drivers/xen/preempt.c:37 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 20775, name: xl INFO: lockdep is turned off. CPU: 1 PID: 20775 Comm: xl Tainted: G D W 5.4.46-1_prgmr_debug.el7.x86_64 #1 Call Trace: dump_stack+0x8f/0xd0 ___might_sleep.cold.76+0xb2/0x103 xen_maybe_preempt_hcall+0x48/0x70 xen_do_hypervisor_callback+0x37/0x40 RIP: e030:xen_hypercall_xen_version+0xa/0x20 Code: ... RSP: e02b:ffffc900400dcc30 EFLAGS: 00000246 RAX: 000000000004000d RBX: 0000000000000200 RCX: ffffffff8100122a RDX: ffff88812e788000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffffff83ee3ad0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: ffff8881824aa0b0 R13: 0000000865496000 R14: 0000000865496000 R15: ffff88815d040000 ? xen_hypercall_xen_version+0xa/0x20 ? xen_force_evtchn_callback+0x9/0x10 ? check_events+0x12/0x20 ? xen_restore_fl_direct+0x1f/0x20 ? _raw_spin_unlock_irqrestore+0x53/0x60 ? debug_dma_sync_single_for_cpu+0x91/0xc0 ? _raw_spin_unlock_irqrestore+0x53/0x60 ? xen_swiotlb_sync_single_for_cpu+0x3d/0x140 ? mlx4_en_process_rx_cq+0x6b6/0x1110 [mlx4_en] ? mlx4_en_poll_rx_cq+0x64/0x100 [mlx4_en] ? net_rx_action+0x151/0x4a0 ? __do_softirq+0xed/0x55b ? irq_exit+0xea/0x100 ? xen_evtchn_do_upcall+0x2c/0x40 ? xen_do_hypervisor_callback+0x29/0x40 ? xen_hypercall_domctl+0xa/0x20 ? xen_hypercall_domctl+0x8/0x20 ? privcmd_ioctl+0x221/0x990 [xen_privcmd] ? do_vfs_ioctl+0xa5/0x6f0 ? ksys_ioctl+0x60/0x90 ? trace_hardirqs_off_thunk+0x1a/0x20 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x62/0x250 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix that by testing preempt_count() before calling cond_resched(). In kernel 5.8 this can't happen any more due to the entry code rework (more than 100 patches, so not a candidate for backporting). The issue was introduced in kernel 4.3, so this patch should go into all stable kernels in [4.3 ... 5.7]. Reported-by: Sarah Newman Fixes: 0fa2f5cb2b0ecd8 ("sched/preempt, xen: Use need_resched() instead of should_resched()") Cc: Sarah Newman Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross Tested-by: Chris Brannon Signed-off-by: Greg Kroah-Hartman commit fe5f83b16307b1772a85496f2079309e9d933823 Author: Peter Xu Date: Thu Aug 6 23:26:11 2020 -0700 mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible commit 75802ca66354a39ab8e35822747cd08b3384a99a upstream. This is found by code observation only. Firstly, the worst case scenario should assume the whole range was covered by pmd sharing. The old algorithm might not work as expected for ranges like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the expected range should be (0, 2g). Since at it, remove the loop since it should not be required. With that, the new code should be faster too when the invalidating range is huge. Mike said: : With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only : adjust to (0, 1g+2m) which is incorrect. : : We should cc stable. The original reason for adjusting the range was to : prevent data corruption (getting wrong page). Since the range is not : always adjusted correctly, the potential for corruption still exists. : : However, I am fairly confident that adjust_range_if_pmd_sharing_possible : is only gong to be called in two cases: : : 1) for a single page : 2) for range == entire vma : : In those cases, the current code should produce the correct results. : : To be safe, let's just cc stable. Fixes: 017b1660df89 ("mm: migration: fix migration of huge PMD shared pages") Signed-off-by: Peter Xu Signed-off-by: Andrew Morton Reviewed-by: Mike Kravetz Cc: Andrea Arcangeli Cc: Matthew Wilcox Cc: Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.com Signed-off-by: Linus Torvalds Signed-off-by: Mike Kravetz Signed-off-by: Greg Kroah-Hartman commit b3ce6ca929dc677f7e443eb3012dfc7a433b1161 Author: Al Viro Date: Sat Aug 22 18:25:52 2020 -0400 do_epoll_ctl(): clean the failure exits up a bit commit 52c479697c9b73f628140dcdfcd39ea302d05482 upstream. Signed-off-by: Al Viro Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman commit 9bbd20326fefd709dc6e7cbf7442ea640bb5f601 Author: Marc Zyngier Date: Wed Aug 19 17:12:17 2020 +0100 epoll: Keep a reference on files added to the check list commit a9ed4a6560b8562b7e2e2bed9527e88001f7b682 upstream. When adding a new fd to an epoll, and that this new fd is an epoll fd itself, we recursively scan the fds attached to it to detect cycles, and add non-epool files to a "check list" that gets subsequently parsed. However, this check list isn't completely safe when deletions can happen concurrently. To sidestep the issue, make sure that a struct file placed on the check list sees its f_count increased, ensuring that a concurrent deletion won't result in the file disapearing from under our feet. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Al Viro Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman commit a7fef53a41dafc2a5b5a185b29c6e94e83f8b516 Author: Michael Ellerman Date: Fri Jul 24 19:25:25 2020 +1000 powerpc: Allow 4224 bytes of stack expansion for the signal frame commit 63dee5df43a31f3844efabc58972f0a206ca4534 upstream. We have powerpc specific logic in our page fault handling to decide if an access to an unmapped address below the stack pointer should expand the stack VMA. The code was originally added in 2004 "ported from 2.4". The rough logic is that the stack is allowed to grow to 1MB with no extra checking. Over 1MB the access must be within 2048 bytes of the stack pointer, or be from a user instruction that updates the stack pointer. The 2048 byte allowance below the stack pointer is there to cover the 288 byte "red zone" as well as the "about 1.5kB" needed by the signal delivery code. Unfortunately since then the signal frame has expanded, and is now 4224 bytes on 64-bit kernels with transactional memory enabled. This means if a process has consumed more than 1MB of stack, and its stack pointer lies less than 4224 bytes from the next page boundary, signal delivery will fault when trying to expand the stack and the process will see a SEGV. The total size of the signal frame is the size of struct rt_sigframe (which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on 64-bit). The 2048 byte allowance was correct until 2008 as the signal frame was: struct rt_sigframe { struct ucontext uc; /* 0 1440 */ /* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */ long unsigned int _unused[2]; /* 1440 16 */ unsigned int tramp[6]; /* 1456 24 */ struct siginfo * pinfo; /* 1480 8 */ void * puc; /* 1488 8 */ struct siginfo info; /* 1496 128 */ /* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */ char abigap[288]; /* 1624 288 */ /* size: 1920, cachelines: 15, members: 7 */ /* padding: 8 */ }; 1920 + 128 = 2048 Then in commit ce48b2100785 ("powerpc: Add VSX context save/restore, ptrace and signal support") (Jul 2008) the signal frame expanded to 2304 bytes: struct rt_sigframe { struct ucontext uc; /* 0 1696 */ <-- /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */ long unsigned int _unused[2]; /* 1696 16 */ unsigned int tramp[6]; /* 1712 24 */ struct siginfo * pinfo; /* 1736 8 */ void * puc; /* 1744 8 */ struct siginfo info; /* 1752 128 */ /* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */ char abigap[288]; /* 1880 288 */ /* size: 2176, cachelines: 17, members: 7 */ /* padding: 8 */ }; 2176 + 128 = 2304 At this point we should have been exposed to the bug, though as far as I know it was never reported. I no longer have a system old enough to easily test on. Then in 2010 commit 320b2b8de126 ("mm: keep a guard page below a grow-down stack segment") caused our stack expansion code to never trigger, as there was always a VMA found for a write up to PAGE_SIZE below r1. That meant the bug was hidden as we continued to expand the signal frame in commit 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context") (Feb 2013): struct rt_sigframe { struct ucontext uc; /* 0 1696 */ /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */ struct ucontext uc_transact; /* 1696 1696 */ <-- /* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */ long unsigned int _unused[2]; /* 3392 16 */ unsigned int tramp[6]; /* 3408 24 */ struct siginfo * pinfo; /* 3432 8 */ void * puc; /* 3440 8 */ struct siginfo info; /* 3448 128 */ /* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */ char abigap[288]; /* 3576 288 */ /* size: 3872, cachelines: 31, members: 8 */ /* padding: 8 */ /* last cacheline: 32 bytes */ }; 3872 + 128 = 4000 And commit 573ebfa6601f ("powerpc: Increase stack redzone for 64-bit userspace to 512 bytes") (Feb 2014): struct rt_sigframe { struct ucontext uc; /* 0 1696 */ /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */ struct ucontext uc_transact; /* 1696 1696 */ /* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */ long unsigned int _unused[2]; /* 3392 16 */ unsigned int tramp[6]; /* 3408 24 */ struct siginfo * pinfo; /* 3432 8 */ void * puc; /* 3440 8 */ struct siginfo info; /* 3448 128 */ /* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */ char abigap[512]; /* 3576 512 */ <-- /* size: 4096, cachelines: 32, members: 8 */ /* padding: 8 */ }; 4096 + 128 = 4224 Then finally in 2017, commit 1be7107fbe18 ("mm: larger stack guard gap, between vmas") exposed us to the existing bug, because it changed the stack VMA to be the correct/real size, meaning our stack expansion code is now triggered. Fix it by increasing the allowance to 4224 bytes. Hard-coding 4224 is obviously unsafe against future expansions of the signal frame in the same way as the existing code. We can't easily use sizeof() because the signal frame structure is not in a header. We will either fix that, or rip out all the custom stack expansion checking logic entirely. Fixes: ce48b2100785 ("powerpc: Add VSX context save/restore, ptrace and signal support") Cc: stable@vger.kernel.org # v2.6.27+ Reported-by: Tom Lane Tested-by: Daniel Axtens Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.au Signed-off-by: Daniel Axtens Signed-off-by: Greg Kroah-Hartman commit 13ad432444c10cc72f185d345de00e8b21dfc70c Author: Vasant Hegde Date: Thu Aug 20 11:48:44 2020 +0530 powerpc/pseries: Do not initiate shutdown when system is running on UPS commit 90a9b102eddf6a3f987d15f4454e26a2532c1c98 upstream. As per PAPR we have to look for both EPOW sensor value and event modifier to identify the type of event and take appropriate action. In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes": SYSTEM_SHUTDOWN 3 The system must be shut down. An EPOW-aware OS logs the EPOW error log information, then schedules the system to be shut down to begin after an OS defined delay internal (default is 10 minutes.) Then in section 10.3.2.2.8 there is table 146 "Platform Event Log Format, Version 6, EPOW Section", which includes the "EPOW Event Modifier": For EPOW sensor value = 3 0x01 = Normal system shutdown with no additional delay 0x02 = Loss of utility power, system is running on UPS/Battery 0x03 = Loss of system critical functions, system should be shutdown 0x04 = Ambient temperature too high All other values = reserved We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW events. If it receives "Power restored" event before predefined time it will cancel the shutdown. Otherwise after predefined time it will shutdown the system. Commit 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of the "on UPS/Battery" case, to immediately shutdown the system. This breaks existing setups that rely on the userspace tool to delay shutdown and let the system run on the UPS. Fixes: 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Vasant Hegde [mpe: Massage change log and add PAPR references] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman commit b1fea03057ef8cd2f2cdac54701b0d92d39564b8 Author: Tom Rix Date: Fri Aug 21 06:56:00 2020 -0700 net: dsa: b53: check for timeout [ Upstream commit 774d977abfd024e6f73484544b9abe5a5cd62de7 ] clang static analysis reports this problem b53_common.c:1583:13: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ent.port &= ~BIT(port); ~~~~~~~~ ^ ent is set by a successful call to b53_arl_read(). Unsuccessful calls are caught by an switch statement handling specific returns. b32_arl_read() calls b53_arl_op_wait() which fails with the unhandled -ETIMEDOUT. So add -ETIMEDOUT to the switch statement. Because b53_arl_op_wait() already prints out a message, do not add another one. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Tom Rix Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f46eec9705309e53389e5ea9659876409c8d8d5b Author: Dinghao Liu Date: Thu Aug 13 16:41:10 2020 +0800 ASoC: intel: Fix memleak in sst_media_open [ Upstream commit 062fa09f44f4fb3776a23184d5d296b0c8872eb9 ] When power_up_sst() fails, stream needs to be freed just like when try_module_get() fails. However, current code is returning directly and ends up leaking memory. Fixes: 0121327c1a68b ("ASoC: Intel: mfld-pcm: add control for powering up/down dsp") Signed-off-by: Dinghao Liu Acked-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200813084112.26205-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 3f9f6b032d23c2668b816dc3d69af486aca56dba Author: Fugang Duan Date: Thu Aug 13 15:13:14 2020 +0800 net: fec: correct the error path for regulator disable in probe [ Upstream commit c6165cf0dbb82ded90163dce3ac183fc7a913dc4 ] Correct the error path for regulator disable. Fixes: 9269e5560b26 ("net: fec: add phy-reset-gpios PROBE_DEFER check") Signed-off-by: Fugang Duan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f3926733dcdcee8e26d65f2f5ae891c3fdea71c5 Author: Przemyslaw Patynowski Date: Thu Aug 6 13:40:59 2020 +0000 i40e: Set RX_ONLY mode for unicast promiscuous on VLAN [ Upstream commit 4bd5e02a2ed1575c2f65bd3c557a077dd399f0e8 ] Trusted VF with unicast promiscuous mode set, could listen to TX traffic of other VFs. Set unicast promiscuous mode to RX traffic, if VSI has port VLAN configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with VLAN to the one without VLAN. Fixes: 6c41a7606967 ("i40e: Add promiscuous on VLAN support") Fixes: 3b1200891b7f ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well") Signed-off-by: Przemyslaw Patynowski Signed-off-by: Aleksandr Loktionov Signed-off-by: Arkadiusz Kubalewski Tested-by: Andrew Bowers Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit 539ae3e03875dacaa9c388aff141ccbb4ef4ecb5 Author: Eric Sandeen Date: Wed Jun 17 14:19:04 2020 -0500 ext4: fix potential negative array index in do_split() [ Upstream commit 5872331b3d91820e14716632ebb56b1399b34fe1 ] If for any reason a directory passed to do_split() does not have enough active entries to exceed half the size of the block, we can end up iterating over all "count" entries without finding a split point. In this case, count == move, and split will be zero, and we will attempt a negative index into map[]. Guard against this by detecting this case, and falling back to split-to-half-of-count instead; in this case we will still have plenty of space (> half blocksize) in each split block. Fixes: ef2b02d3e617 ("ext34: ensure do_split leaves enough free space in both blocks") Signed-off-by: Eric Sandeen Reviewed-by: Andreas Dilger Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/f53e246b-647c-64bb-16ec-135383c70ad7@redhat.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit cc0c6b17f948bd40862ea8db34e0e46741d995fb Author: Luc Van Oostenryck Date: Tue Aug 11 18:33:54 2020 -0700 alpha: fix annotation of io{read,write}{16,32}be() [ Upstream commit bd72866b8da499e60633ff28f8a4f6e09ca78efe ] These accessors must be used to read/write a big-endian bus. The value returned or written is native-endian. However, these accessors are defined using be{16,32}_to_cpu() or cpu_to_be{16,32}() to make the endian conversion but these expect a __be{16,32} when none is present. Keeping them would need a force cast that would solve nothing at all. So, do the conversion using swab{16,32}, like done in asm-generic for similar situations. Reported-by: kernel test robot Signed-off-by: Luc Van Oostenryck Signed-off-by: Andrew Morton Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Stephen Boyd Cc: Arnd Bergmann Link: http://lkml.kernel.org/r/20200622114232.80039-1-luc.vanoostenryck@gmail.com Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit a7631e087f1e0eac2fa06a54674e8fdea794105c Author: Eiichi Tsukata Date: Thu Aug 6 15:18:48 2020 -0700 xfs: Fix UBSAN null-ptr-deref in xfs_sysfs_init [ Upstream commit 96cf2a2c75567ff56195fe3126d497a2e7e4379f ] If xfs_sysfs_init is called with parent_kobj == NULL, UBSAN shows the following warning: UBSAN: null-ptr-deref in ./fs/xfs/xfs_sysfs.h:37:23 member access within null pointer of type 'struct xfs_kobj' Call Trace: dump_stack+0x10e/0x195 ubsan_type_mismatch_common+0x241/0x280 __ubsan_handle_type_mismatch_v1+0x32/0x40 init_xfs_fs+0x12b/0x28f do_one_initcall+0xdd/0x1d0 do_initcall_level+0x151/0x1b6 do_initcalls+0x50/0x8f do_basic_setup+0x29/0x2b kernel_init_freeable+0x19f/0x20b kernel_init+0x11/0x1e0 ret_from_fork+0x22/0x30 Fix it by checking parent_kobj before the code accesses its member. Signed-off-by: Eiichi Tsukata Reviewed-by: Darrick J. Wong [darrick: minor whitespace edits] Signed-off-by: Darrick J. Wong Signed-off-by: Sasha Levin commit 057069c26fd3b5157c59b02d24f0ef5217e195ef Author: Mao Wenan Date: Sun Aug 2 15:44:09 2020 +0800 virtio_ring: Avoid loop when vq is broken in virtqueue_poll [ Upstream commit 481a0d7422db26fb63e2d64f0652667a5c6d0f3e ] The loop may exist if vq->broken is true, virtqueue_get_buf_ctx_packed or virtqueue_get_buf_ctx_split will return NULL, so virtnet_poll will reschedule napi to receive packet, it will lead cpu usage(si) to 100%. call trace as below: virtnet_poll virtnet_receive virtqueue_get_buf_ctx virtqueue_get_buf_ctx_packed virtqueue_get_buf_ctx_split virtqueue_napi_complete virtqueue_poll //return true virtqueue_napi_schedule //it will reschedule napi to fix this, return false if vq is broken in virtqueue_poll. Signed-off-by: Mao Wenan Acked-by: Michael S. Tsirkin Link: https://lore.kernel.org/r/1596354249-96204-1-git-send-email-wenan.mao@linux.alibaba.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: Sasha Levin commit 958f6e406c1c82030d6bb3d070e5adf12e06f57a Author: Javed Hasan Date: Wed Jul 29 01:18:23 2020 -0700 scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases [ Upstream commit ec007ef40abb6a164d148b0dc19789a7a2de2cc8 ] In fc_disc_gpn_id_resp(), skb is supposed to get freed in all cases except for PTR_ERR. However, in some cases it didn't. This fix is to call fc_frame_free(fp) before function returns. Link: https://lore.kernel.org/r/20200729081824.30996-2-jhasan@marvell.com Reviewed-by: Girish Basrur Reviewed-by: Santosh Vernekar Reviewed-by: Saurav Kashyap Reviewed-by: Shyam Sundar Signed-off-by: Javed Hasan Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 4afde5c2320a3277caadda6326d340f6b30e360e Author: Zhe Li Date: Fri Jun 19 17:06:35 2020 +0800 jffs2: fix UAF problem [ Upstream commit 798b7347e4f29553db4b996393caf12f5b233daf ] The log of UAF problem is listed below. BUG: KASAN: use-after-free in jffs2_rmdir+0xa4/0x1cc [jffs2] at addr c1f165fc Read of size 4 by task rm/8283 ============================================================================= BUG kmalloc-32 (Tainted: P B O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in 0xbbbbbbbb age=3054364 cpu=0 pid=0 0xb0bba6ef jffs2_write_dirent+0x11c/0x9c8 [jffs2] __slab_alloc.isra.21.constprop.25+0x2c/0x44 __kmalloc+0x1dc/0x370 jffs2_write_dirent+0x11c/0x9c8 [jffs2] jffs2_do_unlink+0x328/0x5fc [jffs2] jffs2_rmdir+0x110/0x1cc [jffs2] vfs_rmdir+0x180/0x268 do_rmdir+0x2cc/0x300 ret_from_syscall+0x0/0x3c INFO: Freed in 0x205b age=3054364 cpu=0 pid=0 0x2e9173 jffs2_add_fd_to_list+0x138/0x1dc [jffs2] jffs2_add_fd_to_list+0x138/0x1dc [jffs2] jffs2_garbage_collect_dirent.isra.3+0x21c/0x288 [jffs2] jffs2_garbage_collect_live+0x16bc/0x1800 [jffs2] jffs2_garbage_collect_pass+0x678/0x11d4 [jffs2] jffs2_garbage_collect_thread+0x1e8/0x3b0 [jffs2] kthread+0x1a8/0x1b0 ret_from_kernel_thread+0x5c/0x64 Call Trace: [c17ddd20] [c02452d4] kasan_report.part.0+0x298/0x72c (unreliable) [c17ddda0] [d2509680] jffs2_rmdir+0xa4/0x1cc [jffs2] [c17dddd0] [c026da04] vfs_rmdir+0x180/0x268 [c17dde00] [c026f4e4] do_rmdir+0x2cc/0x300 [c17ddf40] [c001a658] ret_from_syscall+0x0/0x3c The root cause is that we don't get "jffs2_inode_info.sem" before we scan list "jffs2_inode_info.dents" in function jffs2_rmdir. This patch add codes to get "jffs2_inode_info.sem" before we scan "jffs2_inode_info.dents" to slove the UAF problem. Signed-off-by: Zhe Li Reviewed-by: Hou Tao Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin commit 00d495ebd489255747e93c7162cd12b2338f3664 Author: Darrick J. Wong Date: Tue Jul 14 10:36:09 2020 -0700 xfs: fix inode quota reservation checks [ Upstream commit f959b5d037e71a4d69b5bf71faffa065d9269b4a ] xfs_trans_dqresv is the function that we use to make reservations against resource quotas. Each resource contains two counters: the q_core counter, which tracks resources allocated on disk; and the dquot reservation counter, which tracks how much of that resource has either been allocated or reserved by threads that are working on metadata updates. For disk blocks, we compare the proposed reservation counter against the hard and soft limits to decide if we're going to fail the operation. However, for inodes we inexplicably compare against the q_core counter, not the incore reservation count. Since the q_core counter is always lower than the reservation count and we unlock the dquot between reservation and transaction commit, this means that multiple threads can reserve the last inode count before we hit the hard limit, and when they commit, we'll be well over the hard limit. Fix this by checking against the incore inode reservation counter, since we would appear to maintain that correctly (and that's what we report in GETQUOTA). Signed-off-by: Darrick J. Wong Reviewed-by: Allison Collins Reviewed-by: Chandan Babu R Reviewed-by: Christoph Hellwig Signed-off-by: Sasha Levin commit aac5d7539f28fe4ae5a78632299fed270adcb1b3 Author: Greg Ungerer Date: Sat Jun 13 17:17:52 2020 +1000 m68knommu: fix overwriting of bits in ColdFire V3 cache control [ Upstream commit bdee0e793cea10c516ff48bf3ebb4ef1820a116b ] The Cache Control Register (CACR) of the ColdFire V3 has bits that control high level caching functions, and also enable/disable the use of the alternate stack pointer register (the EUSP bit) to provide separate supervisor and user stack pointer registers. The code as it is today will blindly clear the EUSP bit on cache actions like invalidation. So it is broken for this case - and that will result in failed booting (interrupt entry and exit processing will be completely hosed). This only affects ColdFire V3 parts that support the alternate stack register (like the 5329 for example) - generally speaking new parts do, older parts don't. It has no impact on ColdFire V3 parts with the single stack pointer, like the 5307 for example. Fix the cache bit defines used, so they maintain the EUSP bit when carrying out cache actions through the CACR register. Signed-off-by: Greg Ungerer Signed-off-by: Sasha Levin commit 609e9302f163f4c516d1cf722006aa46bea5d147 Author: Xiongfeng Wang Date: Tue Jul 21 22:24:07 2020 -0700 Input: psmouse - add a newline when printing 'proto' by sysfs [ Upstream commit 4aec14de3a15cf9789a0e19c847f164776f49473 ] When I cat parameter 'proto' by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/module/psmouse/parameters/proto autoroot@syzkaller:~# Signed-off-by: Xiongfeng Wang Link: https://lore.kernel.org/r/20200720073846.120724-1-wangxiongfeng2@huawei.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin commit 0bd77f37daf707706ebe5c98f1744c317e71540a Author: Evgeny Novikov Date: Fri Jul 10 11:02:23 2020 +0200 media: vpss: clean up resources in init [ Upstream commit 9c487b0b0ea7ff22127fe99a7f67657d8730ff94 ] If platform_driver_register() fails within vpss_init() resources are not cleaned up. The patch fixes this issue by introducing the corresponding error handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 3264112eb59b242aac2e3202464478452b6cc942 Author: Chuhong Yuan Date: Fri Jun 5 18:17:28 2020 +0200 media: budget-core: Improve exception handling in budget_register() [ Upstream commit fc0456458df8b3421dba2a5508cd817fbc20ea71 ] budget_register() has no error handling after its failure. Add the missed undo functions for error handling to fix it. Signed-off-by: Chuhong Yuan Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit e42d52cafb1a8e7887ce135f99c1be889b47b5d2 Author: Stanley Chu Date: Fri Jun 12 09:26:24 2020 +0800 scsi: ufs: Add DELAY_BEFORE_LPM quirk for Micron devices [ Upstream commit c0a18ee0ce78d7957ec1a53be35b1b3beba80668 ] It is confirmed that Micron device needs DELAY_BEFORE_LPM quirk to have a delay before VCC is powered off. Sdd Micron vendor ID and this quirk for Micron devices. Link: https://lore.kernel.org/r/20200612012625.6615-2-stanley.chu@mediatek.com Reviewed-by: Bean Huo Reviewed-by: Alim Akhtar Signed-off-by: Stanley Chu Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit f6f3fdf5052bd0a1bb40188feceaa027c40ebc29 Author: Jan Kara Date: Fri Jul 31 18:21:35 2020 +0200 ext4: fix checking of directory entry validity for inline directories [ Upstream commit 7303cb5bfe845f7d43cd9b2dbd37dbb266efda9b ] ext4_search_dir() and ext4_generic_delete_entry() can be called both for standard director blocks and for inline directories stored inside inode or inline xattr space. For the second case we didn't call ext4_check_dir_entry() with proper constraints that could result in accepting corrupted directory entry as well as false positive filesystem errors like: EXT4-fs error (device dm-0): ext4_search_dir:1395: inode #28320400: block 113246792: comm dockerd: bad entry in directory: directory entry too close to block end - offset=0, inode=28320403, rec_len=32, name_len=8, size=4096 Fix the arguments passed to ext4_check_dir_entry(). Fixes: 109ba779d6cc ("ext4: check for directory entries too close to block end") CC: stable@vger.kernel.org Signed-off-by: Jan Kara Link: https://lore.kernel.org/r/20200731162135.8080-1-jack@suse.cz Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit b522f43beefc90961d9fccf83e7f4c1dba724bc4 Author: Eric Biggers Date: Mon Apr 24 10:00:13 2017 -0700 ext4: clean up ext4_match() and callers [ Upstream commit d9b9f8d5a88cb7881d9f1c2b7e9de9a3fe1dc9e2 ] When ext4 encryption was originally merged, we were encrypting the user-specified filename in ext4_match(), introducing a lot of additional complexity into ext4_match() and its callers. This has since been changed to encrypt the filename earlier, so we can remove the gunk that's no longer needed. This more or less reverts ext4_search_dir() and ext4_find_dest_de() to the way they were in the v4.0 kernel. Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 1a4029e931dc7d9dd0ba88cb8165b2d8737d52c5 Author: Charan Teja Reddy Date: Thu Aug 20 17:42:27 2020 -0700 mm, page_alloc: fix core hung in free_pcppages_bulk() commit 88e8ac11d2ea3acc003cf01bb5a38c8aa76c3cfd upstream. The following race is observed with the repeated online, offline and a delay between two successive online of memory blocks of movable zone. P1 P2 Online the first memory block in the movable zone. The pcp struct values are initialized to default values,i.e., pcp->high = 0 & pcp->batch = 1. Allocate the pages from the movable zone. Try to Online the second memory block in the movable zone thus it entered the online_pages() but yet to call zone_pcp_update(). This process is entered into the exit path thus it tries to release the order-0 pages to pcp lists through free_unref_page_commit(). As pcp->high = 0, pcp->count = 1 proceed to call the function free_pcppages_bulk(). Update the pcp values thus the new pcp values are like, say, pcp->high = 378, pcp->batch = 63. Read the pcp's batch value using READ_ONCE() and pass the same to free_pcppages_bulk(), pcp values passed here are, batch = 63, count = 1. Since num of pages in the pcp lists are less than ->batch, then it will stuck in while(list_empty(list)) loop with interrupts disabled thus a core hung. Avoid this by ensuring free_pcppages_bulk() is called with proper count of pcp list pages. The mentioned race is some what easily reproducible without [1] because pcp's are not updated for the first memory block online and thus there is a enough race window for P2 between alloc+free and pcp struct values update through onlining of second memory block. With [1], the race still exists but it is very narrow as we update the pcp struct values for the first memory block online itself. This is not limited to the movable zone, it could also happen in cases with the normal zone (e.g., hotplug to a node that only has DMA memory, or no other memory yet). [1]: https://patchwork.kernel.org/patch/11696389/ Fixes: 5f8dcc21211a ("page-allocator: split per-cpu list into one-list-per-migrate-type") Signed-off-by: Charan Teja Reddy Signed-off-by: Andrew Morton Acked-by: David Hildenbrand Acked-by: David Rientjes Acked-by: Michal Hocko Cc: Michal Hocko Cc: Vlastimil Babka Cc: Vinayak Menon Cc: [2.6+] Link: http://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 8c6a0bcb20a86f7419e6777d2a18aa55be974d22 Author: Doug Berger Date: Thu Aug 20 17:42:24 2020 -0700 mm: include CMA pages in lowmem_reserve at boot commit e08d3fdfe2dafa0331843f70ce1ff6c1c4900bf4 upstream. The lowmem_reserve arrays provide a means of applying pressure against allocations from lower zones that were targeted at higher zones. Its values are a function of the number of pages managed by higher zones and are assigned by a call to the setup_per_zone_lowmem_reserve() function. The function is initially called at boot time by the function init_per_zone_wmark_min() and may be called later by accesses of the /proc/sys/vm/lowmem_reserve_ratio sysctl file. The function init_per_zone_wmark_min() was moved up from a module_init to a core_initcall to resolve a sequencing issue with khugepaged. Unfortunately this created a sequencing issue with CMA page accounting. The CMA pages are added to the managed page count of a zone when cma_init_reserved_areas() is called at boot also as a core_initcall. This makes it uncertain whether the CMA pages will be added to the managed page counts of their zones before or after the call to init_per_zone_wmark_min() as it becomes dependent on link order. With the current link order the pages are added to the managed count after the lowmem_reserve arrays are initialized at boot. This means the lowmem_reserve values at boot may be lower than the values used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the ratio values are unchanged. In many cases the difference is not significant, but for example an ARM platform with 1GB of memory and the following memory layout cma: Reserved 256 MiB at 0x0000000030000000 Zone ranges: DMA [mem 0x0000000000000000-0x000000002fffffff] Normal empty HighMem [mem 0x0000000030000000-0x000000003fffffff] would result in 0 lowmem_reserve for the DMA zone. This would allow userspace to deplete the DMA zone easily. Funnily enough $ cat /proc/sys/vm/lowmem_reserve_ratio would fix up the situation because as a side effect it forces setup_per_zone_lowmem_reserve. This commit breaks the link order dependency by invoking init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages have the chance to be properly accounted in their zone(s) and allowing the lowmem_reserve arrays to receive consistent values. Fixes: bc22af74f271 ("mm: update min_free_kbytes from khugepaged after core initialization") Signed-off-by: Doug Berger Signed-off-by: Andrew Morton Acked-by: Michal Hocko Cc: Jason Baron Cc: David Rientjes Cc: "Kirill A. Shutemov" Cc: Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 6662601e579096e3bd9d00b0847ff013073f4a25 Author: Wei Yongjun Date: Thu Aug 20 17:42:14 2020 -0700 kernel/relay.c: fix memleak on destroy relay channel commit 71e843295c680898959b22dc877ae3839cc22470 upstream. kmemleak report memory leak as follows: unreferenced object 0x607ee4e5f948 (size 8): comm "syz-executor.1", pid 2098, jiffies 4295031601 (age 288.468s) hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace: relay_open kernel/relay.c:583 [inline] relay_open+0xb6/0x970 kernel/relay.c:563 do_blk_trace_setup+0x4a8/0xb20 kernel/trace/blktrace.c:557 __blk_trace_setup+0xb6/0x150 kernel/trace/blktrace.c:597 blk_trace_ioctl+0x146/0x280 kernel/trace/blktrace.c:738 blkdev_ioctl+0xb2/0x6a0 block/ioctl.c:613 block_ioctl+0xe5/0x120 fs/block_dev.c:1871 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x170/0x1ce fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 'chan->buf' is malloced in relay_open() by alloc_percpu() but not free while destroy the relay channel. Fix it by adding free_percpu() before return from relay_destroy_channel(). Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Reported-by: Hulk Robot Signed-off-by: Wei Yongjun Signed-off-by: Andrew Morton Reviewed-by: Chris Wilson Cc: Al Viro Cc: Michael Ellerman Cc: David Rientjes Cc: Michel Lespinasse Cc: Daniel Axtens Cc: Thomas Gleixner Cc: Akash Goel Cc: Link: http://lkml.kernel.org/r/20200817122826.48518-1-weiyongjun1@huawei.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 6d26d08216475e5a40e4f6ade397c181a19dc524 Author: Jann Horn Date: Thu Aug 20 17:42:11 2020 -0700 romfs: fix uninitialized memory leak in romfs_dev_read() commit bcf85fcedfdd17911982a3e3564fcfec7b01eebd upstream. romfs has a superblock field that limits the size of the filesystem; data beyond that limit is never accessed. romfs_dev_read() fetches a caller-supplied number of bytes from the backing device. It returns 0 on success or an error code on failure; therefore, its API can't represent short reads, it's all-or-nothing. However, when romfs_dev_read() detects that the requested operation would cross the filesystem size limit, it currently silently truncates the requested number of bytes. This e.g. means that when the content of a file with size 0x1000 starts one byte before the filesystem size limit, ->readpage() will only fill a single byte of the supplied page while leaving the rest uninitialized, leaking that uninitialized memory to userspace. Fix it by returning an error code instead of truncating the read when the requested read operation would go beyond the end of the filesystem. Fixes: da4458bda237 ("NOMMU: Make it possible for RomFS to use MTD devices directly") Signed-off-by: Jann Horn Signed-off-by: Andrew Morton Reviewed-by: Greg Kroah-Hartman Cc: David Howells Cc: Link: http://lkml.kernel.org/r/20200818013202.2246365-1-jannh@google.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit daea4542b1330738281392ffd16f7b44a43fe1e2 Author: Josef Bacik Date: Wed Jul 22 11:12:46 2020 -0400 btrfs: don't show full path of bind mounts in subvol= [ Upstream commit 3ef3959b29c4a5bd65526ab310a1a18ae533172a ] Chris Murphy reported a problem where rpm ostree will bind mount a bunch of things for whatever voodoo it's doing. But when it does this /proc/mounts shows something like /dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0 /dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo/bar 0 0 Despite subvolid=256 being subvol=/foo. This is because we're just spitting out the dentry of the mount point, which in the case of bind mounts is the source path for the mountpoint. Instead we should spit out the path to the actual subvol. Fix this by looking up the name for the subvolid we have mounted. With this fix the same test looks like this /dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0 /dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo 0 0 Reported-by: Chris Murphy CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit ba33ed7e3d43c6723b89c5105da86b0f29952b2c Author: Marcos Paulo de Souza Date: Fri Feb 21 14:56:12 2020 +0100 btrfs: export helpers for subvolume name/id resolution [ Upstream commit c0c907a47dccf2cf26251a8fb4a8e7a3bf79ce84 ] The functions will be used outside of export.c and super.c to allow resolving subvolume name from a given id, eg. for subvolume deletion by id ioctl. Signed-off-by: Marcos Paulo de Souza Reviewed-by: David Sterba [ split from the next patch ] Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit cdb3f8b6c5b7dd3d38f0b847164c9d727c9ea6d0 Author: Hugh Dickins Date: Thu Aug 20 17:42:02 2020 -0700 khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter() [ Upstream commit f3f99d63a8156c7a4a6b20aac22b53c5579c7dc1 ] syzbot crashes on the VM_BUG_ON_MM(khugepaged_test_exit(mm), mm) in __khugepaged_enter(): yes, when one thread is about to dump core, has set core_state, and is waiting for others, another might do something calling __khugepaged_enter(), which now crashes because I lumped the core_state test (known as "mmget_still_valid") into khugepaged_test_exit(). I still think it's best to lump them together, so just in this exceptional case, check mm->mm_users directly instead of khugepaged_test_exit(). Fixes: bbe98f9cadff ("khugepaged: khugepaged_test_exit() check mmget_still_valid()") Reported-by: syzbot Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Acked-by: Yang Shi Cc: "Kirill A. Shutemov" Cc: Andrea Arcangeli Cc: Song Liu Cc: Mike Kravetz Cc: Eric Dumazet Cc: [4.8+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008141503370.18085@eggly.anvils Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit db63d1862181e0c16cee82cec162c6c20e503da0 Author: Hugh Dickins Date: Thu Aug 6 23:26:25 2020 -0700 khugepaged: khugepaged_test_exit() check mmget_still_valid() [ Upstream commit bbe98f9cadff58cdd6a4acaeba0efa8565dabe65 ] Move collapse_huge_page()'s mmget_still_valid() check into khugepaged_test_exit() itself. collapse_huge_page() is used for anon THP only, and earned its mmget_still_valid() check because it inserts a huge pmd entry in place of the page table's pmd entry; whereas collapse_file()'s retract_page_tables() or collapse_pte_mapped_thp() merely clears the page table's pmd entry. But core dumping without mmap lock must have been as open to mistaking a racily cleared pmd entry for a page table at physical page 0, as exit_mmap() was. And we certainly have no interest in mapping as a THP once dumping core. Fixes: 59ea6d06cfa9 ("coredump: fix race condition between collapse_huge_page() and core dumping") Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Cc: Andrea Arcangeli Cc: Song Liu Cc: Mike Kravetz Cc: Kirill A. Shutemov Cc: [4.8+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008021217020.27773@eggly.anvils Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 854cbc3db30382717af6dd6cd3d69aced5fc6681 Author: Kevin Hao Date: Thu Jul 30 16:23:18 2020 +0800 tracing/hwlat: Honor the tracing_cpumask [ Upstream commit 96b4833b6827a62c295b149213c68b559514c929 ] In calculation of the cpu mask for the hwlat kernel thread, the wrong cpu mask is used instead of the tracing_cpumask, this causes the tracing/tracing_cpumask useless for hwlat tracer. Fixes it. Link: https://lkml.kernel.org/r/20200730082318.42584-2-haokexin@gmail.com Cc: Ingo Molnar Cc: stable@vger.kernel.org Fixes: 0330f7aa8ee6 ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs") Signed-off-by: Kevin Hao Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sasha Levin commit ee458aa7a03a8bdbc1f70e2b11d8d08c624f313f Author: Steven Rostedt (VMware) Date: Tue Jan 31 16:48:23 2017 -0500 tracing: Clean up the hwlat binding code [ Upstream commit f447c196fe7a3a92c6396f7628020cb8d564be15 ] Instead of initializing the affinity of the hwlat kthread in the thread itself, simply set up the initial affinity at thread creation. This simplifies the code. Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sasha Levin commit b907dd1d2ddb3665ffc3c920350e7baa6772dfb2 Author: Masami Hiramatsu Date: Fri Jul 10 22:11:23 2020 +0900 perf probe: Fix memory leakage when the probe point is not found [ Upstream commit 12d572e785b15bc764e956caaa8a4c846fd15694 ] Fix the memory leakage in debuginfo__find_trace_events() when the probe point is not found in the debuginfo. If there is no probe point found in the debuginfo, debuginfo__find_probes() will NOT return -ENOENT, but 0. Thus the caller of debuginfo__find_probes() must check the tf.ntevs and release the allocated memory for the array of struct probe_trace_event. The current code releases the memory only if the debuginfo__find_probes() hits an error but not checks tf.ntevs. In the result, the memory allocated on *tevs are not released if tf.ntevs == 0. This fixes the memory leakage by checking tf.ntevs == 0 in addition to ret < 0. Fixes: ff741783506c ("perf probe: Introduce debuginfo to encapsulate dwarf information") Signed-off-by: Masami Hiramatsu Reviewed-by: Srikar Dronamraju Cc: Andi Kleen Cc: Oleg Nesterov Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/159438668346.62703.10887420400718492503.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit 71e7ac9ae8f0571fcd151cb35b6757ab1bfc109b Author: Liu Ying Date: Thu Jul 9 10:28:52 2020 +0800 drm/imx: imx-ldb: Disable both channels for split mode in enc->disable() [ Upstream commit 3b2a999582c467d1883716b37ffcc00178a13713 ] Both of the two LVDS channels should be disabled for split mode in the encoder's ->disable() callback, because they are enabled in the encoder's ->enable() callback. Fixes: 6556f7f82b9c ("drm: imx: Move imx-drm driver out of staging") Cc: Philipp Zabel Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: NXP Linux Team Cc: Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin commit 7ee66a8a71cf68a44ecfdf2f58e6847cf654ff88 Author: Jan Beulich Date: Mon Feb 26 04:11:51 2018 -0700 x86/asm: Add instruction suffixes to bitops commit 22636f8c9511245cb3c8412039f1dd95afb3aa59 upstream. Omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream gas in the future (mine does already). Add the missing suffixes here. Note that for 64-bit this means some operations change from being 32-bit to 64-bit. Signed-off-by: Jan Beulich Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/5A93F98702000078001ABACC@prv-mh.provo.novell.com Signed-off-by: Greg Kroah-Hartman commit 3f2bea782ec1a4a3f30881f1e966057ed410f4e7 Author: Uros Bizjak Date: Wed Sep 6 17:18:08 2017 +0200 x86/asm: Remove unnecessary \n\t in front of CC_SET() from asm templates commit 3c52b5c64326d9dcfee4e10611c53ec1b1b20675 upstream. There is no need for \n\t in front of CC_SET(), as the macro already includes these two. Signed-off-by: Uros Bizjak Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20170906151808.5634-1-ubizjak@gmail.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman